GE Dash 4000 Service Manual

Preventive maintenance: Cleaning and disinfecting the patient monitor
2000966-542D Dash 3000/4000/5000 5-5
Impact or results of improper cleaning products and processes
The following consequences can occur if you do not follow the cautionary
guidelines when cleaning the equipment:
 Product discoloration.
 Melting, dulling, or distorting of the device case.
 Brittle and breaking device case.
 Blurring the lettering on label text.
 Equipment malfunction or failure.
 Void warranty.
Cleaning products to avoid
Cleaning products known to cause the types of problems listed previously
include, but are not limited to:
 Sani-Cloth
®
Wipes
 Ascepti
®
Wipes
 HB Quat
®

Clorox
®
Wipes (they do not contain bleach)
 Over-the-counter detergents (e.g., Fantastic
®
, Tilex
®
, etc.)
Products that contain active ingredients and solutions similar to these
products should be avoided.
Storage
 Always remove batteries when the device is not in use (even for short
periods of time).
 Store in a dry well-ventilated area.

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available