GE Dash 4000 Service Manual

Functional and electrical safety checks: Functional Checkout procedures
2000966-542D Dash 3000/4000/5000 8-35
12. Press and release the 8h.
13. Switch and verify the SRC-MAX default indicators are lit as follows:
 HEART RATE = 200 bpm
 LIGHT = HIGH
 %SpO2 = 90
 MODULATION = HIGH
Allow the Dash a few seconds to obtain a steady reading.
14. Verify the following SpO2 readings on the patient monitor for
saturation and pulse rate:
 Saturation (%): 90 ±2
 Rate (bpm): 200 ±3% (194 to 206)
Noninvasive blood pressure tests
Equipment
Digital Manometer with a range of at least 0 to 1000 mmHg Accuracy
0.5% FS.
 NBP cuff coupling (400787-005 or equivalent)
 NBP hose coupling (400787-006 or equivalent)
 NBP tee (4745-101 or equivalent)
 NBP tubing 2 feet (401582-001 or equivalent)
 Manometer: mercury, digital (Sensym PDM200M – no longer
available for ordering, Meriam Instrument Smart Manometer Model
350 DM2000, or equivalent)
 NBP tube (2017008-001 or equivalent)
 NBP cuff (2203 or equivalent)
 Pipe: PVC

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available