GE Dash 4000 Service Manual

Field replaceable units: Replace display assembly parts
7-26 Dash 3000/4000/5000 2000966-542D
Replace display assembly parts
Use the following procedures to replace the display assembly parts:
1. “Remove or replace handle assembly” on page 7-10.
2. “Remove or replace display assembly” on page 7-18.
3. “Open display assembly” on page 7-27.
4. On the following pages find the steps for the part and Dash model
you are servicing:
 “Replace Dash 4000/5000 alarm light” on page 7-28.
 “Replace display inverter” on page 7-28.
 “Replace keypad assembly or Trim Knob control” on page 7-30.
 “Replace display components without LCD” on page 7-31.

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available