GE Dash 4000 Service Manual

Field replaceable units: Replacement procedures
2000966-542D Dash 3000/4000/5000 7-9
Replacement procedures
Unless otherwise stated, reassemble the patient monitor in reverse order
of disassembly.
NOTE
When reassembling the patient monitor, observe the following
guidelines:
 To prevent cracking the plastic components, do not overtighten
the screws fastening the plastic components together.
 To prevent cross-threading plastic components, carefully start
threading the screws by hand, then finish tightening the screws
using an appropriate hand tool.

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available