GE Dash 4000 Service Manual

Troubleshooting: Wireless LAN
6-24 Dash 3000/4000/5000 2000966-542D
Wireless LAN
Many factors could cause the wireless patient monitor to exhibit some
form of interruption in communication, such as loss of waveforms or
delayed communication response. The solution may be as simple as
enabling the wireless communication feature or as complex as analyzing
the wireless and wired network. The purpose of this section is to help
identify the source of the problem by using the wireless status indicator
that is part of the monitor.
There are three different locations of wireless status indicators. One is
located in the REVISION AND ID Menu, one in the Service Menu.,
and one in the lower right corner of the display.
944A, 945A, 946A
REVISION AND ID Menu
Service Menu (page 1)
Service Menu (page 2)

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available