GE Dash 4000 Service Manual

Troubleshooting: Get error logs
2000966-542D Dash 3000/4000/5000 6-23
Copy error logs
Once the Care Unit, device, and date have been specified the final step is
to begin copying the error logs to the floppy diskette.
1. Insert a PC-formatted, high-density floppy diskette into the floppy
diskette drive of the central station.
2. Select START COPY. A new display appears that confirms the file
source device.
Using the Trim Knob control, select the desired function. Press the
Trim Knob control to start.
Once the copy function begins the Start Copy button changes to
show the function: “copying.”
Eject floppy
Select this option to eject the floppy diskette from the central station’s
disk drive.
047A

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available