T-2 Dash 3000/4000/5000 2000966-542D
22 April 2013
NOTE: The information in this manual only applies to Dash 3000/4000/5000 patient monitors with software
version 7. It does not apply to earlier software versions. Due to continuing product innovation, specifications in
this manual are subject to change without notice.
NOTE: The assembly drawings in this manual only support patient monitors with the SHQ product code.
Patient monitors with the SHQ product code are only compatible with software version 6.10 or later.
NOTE: Wireless LAN troubleshooting procedures are specific to the wireless LAN technology installed on the
patient monitor. For Dash patient monitors with the LA-4137 wireless LAN hardware (identified on the Dash
wireless LAN transmitter label), and Dash version 7 or later software, follow the wireless LAN troubleshooting
instructions found in the service manual you received with your patient monitor.
NOTE: The 802.11 a/b/g wireless feature is only compatible with Dash 3000/4000/5000 patient monitors with
software version 7 or later.
NOTE: The Dash Port 2 docking station with version 2.1 or later software is only compatible with the Dash
3000/4000/5000 patient monitor with version 7.2 or later software.
NOTE: For technical documentation purposes, the abbreviation GE is used for the legal entity name, GE
Medical Systems Information Technologies, Inc.
Listed below are GE Medical Systems Information Technologies, Inc. trademarks. All other trademarks
contained herein are the property of their respective owners.
DASH, DINAMAP, EAGLE, MULTI-LINK, MUSE, SAM, SOLAR, TRIM KNOB, and UNITY NETWORK are
trademarks of GE Medical Systems Information Technologies, Inc., registered in the United States Patent and
Trademark Office.
12SL, CARESCAPE, CENTRALSCOPE, INTELLIRATE, MENTOR, and SUPERSTAT are trademarks of GE
Medical Systems Information Technologies, Inc.
To Next Page
Loading...
Need help?
General
