GE ImageQuant LAS 4000 - 3 Exchanging accessory parts

3 Exchanging accessory parts
3.1 Changing or installing a filter
Optical filters are installed in the filter turret localted under the lens inside the IDX. This section describes
how to install or change a filter on the filter turret.
Install a filter in the filter turrent and register it in the ImageQuant LAS 4000 Control Software as follows:
3
2, 5
6
4
1
Ensure that the camera head and PC are connected. Turn on the instrument and the PC, and start
the ImageQuant LAS 4000 Control Software.
2
Close the instrument door
ImageQuant LAS 4000 User Manual 28-9607-42 AB 17
3 Exchanging accessory parts