GE ImageQuant LAS 4000 - 4.2 Preparation for exposure

DescriptionNo.DescriptionNo.
Focusing9Sensitivity/Resolution4
Adjusts the focus and position.Sensitivity can be set.
Start10Add Digitization Image5
Starts the exposure.A digitization image is exposed simultaneous-
ly with a chemiluminescence image.
(Chemiluminescence method only.)
Note:
The software needs to be started once after installing from an account with administrator
priveleges. This is to ensure that necessary folders and files are created.
4.2 Preparation for exposure
2
1
Analyzing PC
OperationStep
Turn on the ImageQuant LAS 4000, computer and peripheral equipment.1
Start up ImageQuant LAS 4000 Control Software.
A message is displayed until the ImageQuant LAS 4000 is ready.
2
Note:
The power switches of the instrument and PC can be turned on in any order.
ImageQuant LAS 4000 User Manual 28-9607-42 AB 33
4 Operating the ImageQuant LAS 4000
4.1 Layout of the ImageQuant LAS 4000 Control Software