GE ImageQuant LAS 4000 - 4.5 Exposing chemiluminescent samples

4
Open the IDX door and insert the tray. Place the Epi or Trans trays in position with the side with a
hole facing outwards.
5
Ensure the lens cap is removed and close the IDX door.
4.5 Exposing chemiluminescent samples
This section describes how to take images of chemiluminescent samples. No illumination is used for
this application.
Place a sample on the Epi tray. Put the tray in the ImageQuant LAS 4000 then close the door.
5
4
3
6
2
1
ImageQuant LAS 4000 User Manual 28-9607-42 AB 37
4 Operating the ImageQuant LAS 4000
4.4 Placing the sample