GE ImageQuant LAS 4000 - Exposing Dye Stained Samples and Films (Trans Illumination)

ActionStep
Adjust the gradations of the exposed image, then save and print the image.
7
Click the Complete button.
The display returns to the main screen.
4.9 Exposing dye stained samples and films (Trans illumination)
This section describes how to expose dye-stained samples using white trans illumination.
Place a sample on the White trans tray. Put the tray in the IDX and close the door.
ImageQuant LAS 4000 User Manual 28-9607-42 AB 55
4 Operating the ImageQuant LAS 4000
4.8 Exposing dye stained samples and films (White Epi light)