GE ImageQuant LAS 4000 - Changing the Light Sources

7
Fix the lens in position be turning it to the right.
8
Remove the lens cap.
9
Placel the lens hood on the lens.
Lens hood
3.3 Changing the light sources
Both trans (transmitted) and epi (incident) light sources are available for exposure with the ImageQuant
LAS 4000. This section describes how to change both types of light source.
The following table summarizes the properties of the various light sources.
Peak wavelengthNameType
312 nmUV transilluminator
Transmitted
-White light table
ImageQuant LAS 4000 User Manual 28-9607-42 AB 27
3 Exchanging accessory parts
3.2 Installing or exchanging the lens
3.2.4 Installing the wide view lens