ActionStep
Select Sensitivity/Resolution.
5
Note:
The check box for Add Digitization Image can be checked to also perform a white-
light exposure, for example to image dye-stained molecular weight markers. In
this case the white epi light should be in place. Leave unchecked if this is not nec-
essary.
TIP:
Select Help:Sensitivity/Resolution.... This opens the following diagram that de-
scribes the relation between sensitivity and resolution.
Click the Start button.
6
Result: The exposure is started. The orange Busy LED lights on the instrument during exposure.
ImageQuant LAS 4000 User Manual 28-9607-42 AB 41
4 Operating the ImageQuant LAS 4000
4.5 Exposing chemiluminescent samples
To Next Page
Loading...
