GE LPS-O - Page 199

GE Power Management LPS-O Line Protection System 8-
31
8 LOCAL USER INTERFACE 8.4 REMOTE COMMUNICATION INTERFACE
8
Table 8–6: MODEM COMMANDS FOR COMMUNICATION BETWEEN RELAY AND PC
Function LPS-O Modem (remote) PC Modem (local)
DTR Status Follow DTR (&D3) Follow DTR (&D3)
Result Code Format Numeric (V0) Numeric (V0)
Result Code Display Disable (Q1) Disable (Q1)
Command State Echo Disable (E0) Disable (E0)
Auto-Answer Enable (S0=1) Disable (S0=0)
Carrier Detect Follow CD (&C1) Follow CD (&C1)
Jack Type RJ-11, etc. (&J0) RJ-11, etc. (&J0)
Command Recognition Disable (Dumb) Enable (Smart)
Comm. Std. (@1200 bps) Bell 212A (B1) Bell 212A (B1)
Response to DTR Ignore DTR (&D0) Ignore DTR (&D0)
Fall Back to 4800Bd AT#F1
Pulse Dial Ratio 39%Mk/61%Bk (&P0) 39%Mk/61%Bk (&P0)