D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
3-38 Section 3-6 - Configuration
PRELIMINARY
Table 3-16 Date and Time Adjustments
STEP TASK EXPECTED RESULT(S)
1.
• Open the System
(Configuration) Window,
• Select Settings, if needed.
The Settings window is displayed.
2.
Select the preferred Date Format,
see (d) in Figure 3-19.
• DD = Date (two digits)
• MM = Month (two digits)
• YYYY = Year (four digits)
• EU: the European/International
“DD.MM.YYYY” format is used
• US: the American
“MM.DD.YYYY” format is used
3.
Select the preferred Time Format,
see (3) in the figure.
• 24: the 24 hour format is used
• 12: the 12 AM/PM hour format
is used
4.
Adjust the date, see (1) in the
figure.
New date is displayed
5.
Adjust the time, see (2) in the
figure.
New time is displayed
6.
Select Default Century (1900,
2000 or None), see (5) in the figure.
• 1900:
• the number 19 is automatically
displayed when entering the year in the
patient date of birth.
• To edit century, press BACKSPACE
twice.
• 2000:
• the number 20 is automatically
displayed when entering the year in the
patient date of birth.
• To edit century, press BACKSPACE
twice.
• None:
• the four digits have to be typed when
entering the year in the patient date of
birth.
• The selected setting will be used as
soon as the unit has been restarted.
To Next Page
Loading...
