GE Venue R2

D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
6-2 Section 6-3 - Cockpit (Monitor) Adjustments
PRELIMINARY
Section 6-4
Articulated Arm Movement Adjustments
6-4-1 Arm Movement Adjustment - General Instructions
1.) The cockpit adjustment movement resistance may be increased/decreased in the following axes
(red arrow shows location of the controlling screw per axis):
6-4-2 Tilt Resistance Adjustments
1.) At the back of the cockpit, disconnect the Wi-Fi dongle if exists: release four screws and remove
the transparent cover and the Wi-Fi dongle
2.) Remove the cockpit rear cover if exists: disconnect four screws using appropriate Phillips
screwdriver.
Figure 6-20 Optional Movement Resistances Adjustments
Figure 6-21 Wi-Fi Cover and Dongle Removal