8-184 Section 8-9 - Operating System and Application Software Loading Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
Section 8-9
Operating System and Application Software Loading Procedures
8-9-1 Burning Disk-on-Key Media with SW Downloaded from GE Portal
8-9-1-1 ImageUSB System Requirements
1.) Browse to the downloaded file location and run the ImageUSB.exe file.
2.) If the Windows User Account Control dialog box appears, click Yes to allow the program to make
changes to your computer.
3.) The ImageUSB by PassMark Software main window appears.
Burning of the disk-on-key media (Mem stick) is performed using ImageUSB utility downloaded from the
GE portal.
Table 8-3 ImageUSB System Requirements
Requirement Description
Operating System
Windows XP SP3, Windows Server 2003, Windows Vista, Windows Server
2008, Windows 7, Windows 8, and Windows 10
Memory (RAM)
256 MB or more.
Hard Disk Space
3 MB of free space for installation, plus additional space required to store an
image file.
The minimum required size of the disk-on-key to be used must be 32GB.
Figure 8-207 Disk-on-Key Burn Process - ImageUSB Main Window
To Next Page
Loading...
