10-10 Section 10-3 - Why Do Maintenance?
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
10-5-4 Cleaning
10-5-4-1 General Cleaning
Frequent and diligent cleaning of the Venue™ ultrasound unit reduces the risk of spreading infection
from person to person, and also helps to maintain a clean working environment.
• Use only cleaning materials and solutions as recommended in the procedures described in the
Venue™ User Manual.
• Do not use any solutions or products not listed in the Venue™ User Manual.
• Never use thinner, benzene, ethanol or methanol alcohol, abrasive cleaners, or other strong
solvents. Only use isopropyl alcohol, when instructed to do so.
• Do not spray any liquid directly onto the Venue™ covers.
• Do not allow any liquid to drip or seep into the system.
• DO NOT scratch or press on the panel with any sharp objects, such as pencils or pens, as this may
result in damage to the panel.
• Make sure not to spill or spray any liquid on the controls, into the Venue™ cabinet, or in the probe
connection receptacle.
• Prior to cleaning, turn OFF power to the Venue™ and disconnect the mains cable.
NOTE: Refer to the Venue™ User Manual for cleaning instructions
WHEN PERFORMING CLEANING PROCEDURES, TO PREVENT THE RISK OF SYSTEM
DAMAGE, ALWAYS OBSERVE THE FOLLOWING PRECAUTIONS:
To Next Page
Loading...
