Chapter 8 - Replacement Procedures 8-155
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
• Two screws at the bottom of the bracket
7.) Reconnect omega bracket: attach 5 screws connecting the omega bracket
8.) Install the MPB module.
9.) Install MPB Front Metal Door.
10.)Refit the following covers: RS Probe Cover, Lower Front eTower, Left side eTower, Right Side
eTower, Upper eTower Front Cover.
Figure 8-162 Reconnecting BE Supporting Bracket
Figure 8-163 BE Omega Bracket Repositioning
• MPB Module Installation Procedure
• MPB Front Metal Door Installation Procedure
• Upper eTower Front Cover Installation Procedure
• Left Side eTower Cover Installation Procedure
• Right Side eTower Cover Installation Procedure
• Lower Front eTower Cover Installation Procedure
• RS Probe Cover Installation Procedure
To Next Page
Loading...
