GE Venue R2

8-200 Section 8-9 - Operating System and Application Software Loading Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
Note: In case of firmware update errors, the following messages may appear :
• Follow the procedure displayed in the window
• If the following errors appear, proceed with T-CFE replacement:
15.)Type in the option key and configure the network settings
16.)Continue with the EZ Config installation as specified in Section 3-6-2-1.
17.)Open: Config screen >> Imaging >> Advanced Tools and make sure the Auto zone increment
Figure 8-242 Venue™ Setup Wizard - Firmware Update Errors
Figure 8-243 Venue™ Setup Wizard - Firmware Update Errors