GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S General safety information
BL068 GB Edition 03/2015 13 / 90 Assembly and Operating Manual
2.2 Safety instructions for operating personnel
The operating manual must be within reach at all times at the location
where the machine is used.
The machine may only be used in a technically fault-free condition, as
well as in accordance with the intended use, in a safety conscious
manner aware of the hazards, and while observing the operating
manual! In particular rectify faults immediately that could impair safety!
In addition to this, the machine may only be operated when all safety
features are present and functioning!
Check the machine at least once each working day for externally
identifiable damage and defects! Immediately report any changes (in-
cluding changes to the operating behaviour) to the office/person in
charge. If necessary, shutdown and secure the machine immediately!
The responsibilities for different jobs within the context of operation,
servicing and maintenance of the machine must be clearly stipulated
and adhered to. This is the only way to avoid mistakes especially in
hazardous situations.
The pertinent rules for prevention of accidents as well as the other,
generally recognised, safety-related and industrial health related rules
must be adhered to.
The operator is obliged to wear personal protective equipment as
appropriate to the local conditions.
Switch-on and shutdown procedures, including emergency shut-
down, must be observed in accordance with the operating manual for
all work that affects operation, and for conversions and adjustments to
the machine and its safety features.
To Next Page
Loading...
