General safety information GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual 14 / 90 BL068 GB Edition 03/2015
2.3 Safety instructions for transport
Immediately report transport damage and/or missing parts to the
supplier.
During transport work, wear a safety helmet, safety shoes and safety
gloves!
Never step under suspended loads!
Only use appropriate, standardised and tested lifting gear, forklifts,
cranes) and sling gear (round slings, lifting straps, sling ropes, chains)
for transport at the assembly site.
When selecting hoisting equipment, always take into account the max-
imum suspended loads!
Please refer to the dimensions and weights in the technical specifica-
tions chapter (3.5).
Only carefully load and transport equipment that has been disassem-
bled, packaged and lashed.
Always ensure that the machine is transported without being knocked
or jolted.
Observe the pictograms on the packaging.
Only attach to the designated sling points.
Always secure transported loads against falling or tipping over!
To Next Page
Loading...
