EasyManua.ls Logo

GEDA MINI 60 S - Instructions for the operating company

Default Icon
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S General Information
BL068 GB Edition 03/2015 9 / 90 Assembly and Operating Manual
1.6 Instructions for the operating company
This operating manual is an essential component of the machine. The
operating company must ensure that operating personnel are informed
about these guidelines.
The operating company must supplement the operating manual with
operating instructions based on existing national regulations for
accident prevention and for the protection of the environment, in-
cluding information regarding supervisory and reporting duties that take
account of company-related specifics, e.g. with reference to work or-
ganisation, work procedures and the personnel employed.
In addition to the obligatory regulations for accident prevention and
industrial safety that apply both in the country of use and at the place
of use, accepted professional rules for working safely and competently
must also be observed.
The operating company must make sure that operating personnel wear
personal protective gear as appropriate to the local conditions.
First aid facilities (first aid kit, etc.) must be kept within reach!
The operating company / user of the machine must not make any
changes, additions or modifications to the machine that could impair
safety without permission from the manufacturer! This also applies to
installing and adjusting safety equipment, as well as welding onto load-
bearing components.
Any replacement and wear parts that are used must correspond to the
technical requirements stipulated by GEDA. This is ensured with origi-
nal replacement parts.
Only employ qualified and / or trained personnel for the tasks de-
scribed in this manual.
The operating company clearly defines the responsibilities of the per-
sonnel for operation / assembly / maintenance.
The operating company is obliged to train all persons authorised to use
the machine in the correct handling of the machine before using it for
the first time, according to the respective area of activity and responsi-
bility of the authorised individual and using practical exercises.
This training must be documented and repeated at regular intervals.
The legally permissible minimum age must be observed!

Table of Contents

Related product manuals