GEDA MINI 60 S

To Next Page

To Previous Page

General Information GEDA

MINI 60 S / MAXI 120 S / MAXI 150 S

Assembly and Operating Manual 2 / 90 BL068 GB Edition 03/2015

Main Page

Table of Contents3
Chapter Page4
General Information5
Information about the Instruction Manual5
Abbreviations7
Information about the Machine7
Name and Address of the Manufacturer8
Notes about the Author and Industrial Property Rights8
Instructions for the Operating Company9
Intended Use10
Requirements of Assembly Personnel11
Operating Personnel11
Improper Use11
General Safety Information12
Residual Risks12
Safety Instructions for Operating Personnel13
Safety Instructions for Transport14
Safety Instructions for Operation15
Safety Instructions for Servicing, Maintenance and Troubleshooting16
Safety Whilst Working on the Electrics18
Technical Description19
Description of Function19
Machine Equipment21
Geda Mini 60 S21
Geda Maxi 120 S / 150 S22
Ground Control (Manual Control)23
Equipment as Accessories24
Adapter24
Pivot Arm Mounting for MINI 60 S24
Pivot Arm Mounting / Universal Pivot Arm for MAXI 120 S / 150 S25
Shackle Lock26
Transportation Frame26
Fall Protection "ECO S" / "Simple28
Small On-Site Main Cabinet29
Load Carrying Equipment30
Load Hook30
Cable Sling30
Hook Carrier31
Hoist Sling31
Bucket Hoist for 4 Buckets31
Bucket Support for 2 Buckets32
Bucket Support for 4 Buckets32
65 Litre Tilting Bucket32
Litre Mortar Silo33
Wire Mesh Cage with Wooden Palette33
Hoisting Cage with Wooden Palette34
Slab Grab34
Chain Suspension for Wheel Barrows35
Technical Data36
Operating and Environmental Conditions36
Data for MINI 60 S37
Data for MAXI 120 S38
Data for MAXI 120 S / 110 V and MAXI / 120 V39
Data for MAXI 150 S40
Wire Rope41
Noise Emissions41
Pivot Arm42
Pivot Arm 300 Kg [660 Lb] and Hook Block 300 Kg [660 Lb]43
Transport44
Inspection on Receiving the Scaffolding Lift44
Transportation of the Machine44
Transportation by Persons44
Transportation Using Lifting Equipment45
Transportation Using a Transportation Frame45
Assembly46
Safety During Assembly46
Assembly Procedure47
Assembling Scaffolding Lift48
Installing the Winch48
Installing the Pivot Arms49
Pivot Arm for the MINI 60 S49
Use with Pivot Arm Mounting50
Universal Pivot Arm for the GEDA MAXI 120 S/150 S51
Pivot Arm 300 Kg [660 Lb] for the GEDA MAXI 150 S52
Electrical Connection of the Winch54
Assembling the Wire Rope55
Securing Loading and Unloading Points56
Check after Assembly and before each Operation58
Operation59
Safety During Operation59
Checks before Starting Work60
Operating the Scaffolding Lift61
Emergency Shutdown62
Interrupting Work - End of Work62
Dismantling (Disassembly)62
Maintenance - Checking - Cleaning63
Inspections63
Documenting the Results64
Checks before Initial Commissioning64
Checks after Assembly / Daily before Starting Operation64
Recurring Inspections64
Checks after Extreme Weather Conditions65
Maintenance Schedule66
Wear and Function Checks67
Motor / Motor Brake67
Gearboxes69
Checking / Replacing the Wire Rope70
Non-Twisting Device with Load Hook72
Rope Pulleys73
Check the Support Elements and Attachment Devices74
Load Carrying Equipment74
Malfunctions - Diagnosis - Repair75
Fault Table76
Fault Rectification77
Motor Is Not Producing Full Output77
Control Fuse77
Slack Rope Switch Operated78
Wire Rope Winds on One Side79
Repair80
Disposal of the Machine81
Summary of Instruction Plates81
Documenting the Checks82

GEDA MINI 60 S - Page 2

Table of Contents

Related product manuals