page | 3
Page TitleIntroduction
ID Name Description
1 Power Press this button to power-on or power-off
the Multi-Format Processor.
2 Power Indicator This LED indicator will glow solid red when
in standby mode and solid blue when the
unit is powered on.
3 IR Receives signals from the included IR
remote control.
4 Input Select Press and release this button to select the
video input. Audio inputs are selectable
and can be linked to video inputs using the
built-in Web interface. See Setup ► Audio
(page 90) for more information.
5 Audio Indicators These LED indicator will glow solid green
to indicate the currently selected audio
input.
6 Video Indicators These LED indicator will glow solid green
to indicate the currently selected video
input.
7 IR Ext Connect an (optional Gefen EXT-RMT-
EXTIRN) IR extender to this port.
8 HDMI Out Connect an HDMI cable from this port
to an HD display. The HDMI output
includes internal HDMI audio or embedded
audio from any of the audio inputs.
9 USB This mini-USB port is for factory use only.
10 Audio Out Connect a pair of RCA-type cables from
the L and R ports to an audio amplifier.
11 DVI Out Connect a DVI cable from this port
to an HD display. This output can be used
as an HDMI output using an appropriate
adapter. When used as HDMI, audio is
also supported through this output.
12 Optical Connect an optical audio cable from this
TOSLINK™ port to an audio amplier.
Getting Started
To Next Page
Loading...