page | 108
Basic Operation
Web Interface
System
ID Name Description
1 RS-232 Feedback Turns off RS-232 feedback for compatibility
with one-way control systems.
2 OSD Timeout Sets the timeout for the On-Screen Display.
3 Display Notication Displays the current source in the upper-
left corner of the display whenever it is
changed.
4 Standby Mode Turns off IP Control. This meets
EnergyStar requirements, but does not
allow unit to be turned back on over IP.
Only choose the Low power / Network
OFF option if you are NOT using IP control.
1
2
3
4
Basic Operation
To Next Page
Loading...