Gefen EXT-MFP - Sending an HPD Pulse

page | 59
Basic OperationBasic Operation
Menu System
Sending an HPD Pulse
Sending an HPD (Hot-Plug Detect) signal pulse cycles the HPD line on the input.
Performing this function is identical to physically disconnecting and reconnecting the cable
between the source and the Multi-Format Processor.
1. Press the Menu button. The Output Setup option will automatically be highlighted.
2. Press the ▲ or ▼ buttons to highlight the Adjust option.
Output Setup
Picture
Adjust
Audio
Network
System
Exit
Output Setup
Picture
Adjust
Audio
Network
System
Exit
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
Information
The Send HPD Pulse menu option is only available when using an HDMI
input signal.