Gefen EXT-MFP - To Set the IP Mode Option(S)

page | 70
Basic Operation
Menu System
► To set the IP Mode option(s):
a. Press the OK button to select IP Mode.
b. The following screen will be displayed:
c. Press the ▲ or ▼ buttons to highlight the desired option.
d. Press the OK button to select the highlighted option.
e. To change the IP Mode option:
i. Select the IP Mode option.
ii. Press ▲, ▼, ◄, or ► buttons to switch between Static or DHCP.
iii. Press the OK button to save the change.
f. To change the IP Address, Subnet Mask, or Def Gateway options:
vii. Press the OK button to select the desired option.
viii. Press the ◄ or ► buttons to select the digit.
ix. Press the ▲ or ▼ buttons to select the numeric value (0 - 9).
x. Press the OK button to save the change.
6. To return to the previous menu, press the ▲ or ▼ buttons to highlight the Back
option, then press the OK button. You can also press the Menu button to return
to the top-level menu.
IP Mode Static
Static IP
IP Address : 192.168.001.072
Subnet Mask : 255.255.255.000
Def Gateway : 192.168.001.001
iP Address : 192.168.001.072
Mac Address : 00:1C;91:04:50:D6
Back
Basic Operation