page | 116
Command Description
Power
#power
Power The Unit On/Off
#get_power
Get Current Power State
#set_low_power
Set low power standby mode
Special
#get_mac_addr
Displays the MAC address
#help
Displays the list of available commands.
Routing
#set_input
Set Input Source with Associated Audio Source
#get_input
Get Input Source
#set_audio_input
Set Audio Source
#get_audio_input
Get Audio Source
Output
#set_output_res
Set output resolution
#get_output_res
Get the current output resolution
#set_output_color
Set output color space per display
#get_output_color
Get output color space per display
#set_output_mode
Set output mode per display
#get_output_mode
Get output mode per display
#set_background_color
Set background color
#get_background_color
Get background color
Input
#get_input_res
Get The Current Input Resolution
#set_video_name
Set The Video Input Name
#get_video_name
Get The Video Input Name
#set_audio_name
Set The Audio Input Name
#get_audio_name
Get The Audio Input Name
Commands
Advanced Operation
Advanced Operation
To Next Page
Loading...