page | 117
Commands
Command Description
Picture
#set_contrast
Set picture contrast
#get_contrast
Get picture contrast
#set_brightness
Set picture brightness
#get_brightness
Get picture brightness
#set_saturation
Set picture saturation
#get_saturation
Get picture saturation
#set_hue
Set picture hue
#get_hue
Get picture hue
#set_color_range
Sets output color range
#get_color_range
Gets output color range
#set_color_temp
Set picture color temperature
#get_color_temp
Get picture color temperature
#set_color_balance
Set picture color balance
#get_color_balance
Get picture color balance
#set_sharpness
Set picture sharpness
#get_sharpness
Get picture sharpness
Adjust
#set_input_hdcp
Set Input HDCP compatibility on or off
#get_input_hdcp
Get Input HDCP compatibility on or off
#set_uo_scan
Set under/over scan
#get_uo_scan
Get under/over scan
#send_hpd
Send HPD (Hot Plug Detect) Pulse
#set_auto_size
Set VGA input auto size adjust
#set_phase
Set VGA input phase
#get_phase
Get VGA input phase
#set_h_position
Set VGA horizontal input position
#get_h_position
Get VGA horizontal input position
#set_v_position
Set VGA vertical input position
#get_v_position
Get VGA vertical input position
#set_aspect_ratio
Set aspect ratio
#get_aspect_ratio
Get aspect ratio
Advanced Operation
To Next Page
Loading...