page | 150
#set_color_range
Sets the output color range. Set Color Range to Limited if your connected display can
only handle a limited RGB range (16 - 235). Otherwise shadows will be “too black” and
highlights will be “too white”. If your display can handle a full color range (0 - 255),
set Color Range to “Full”. The default value is Full.
Syntax
#set_color_range param1
Parameters
param1 Integer [0 ... 1]
param1 Description
0
Full
1
Limited
Example
#set_color_range 1
PICTURE COLOR RANGE SET TO LIMITED
Related Commands
#get_color_range
Advanced Operation
Commands
Advanced Operation
To Next Page
Loading...