page | 73
Basic Operation
Menu System
Lower Power
Turns off IP Control. This meets EnergyStar requirements, but does not allow the unit to
be turned on using IP control. Set this option to IP Off only if you are NOT using IP control.
Set Feedback
Enables or disables feedback for RS-232, UDP, and Telnet. If set to Off, then feedback will
be turned off for compatibility with one-way control systems.
Input Res. Info
Displays the current input resolution / timing and color space information. To return to the
System menu, press the Menu button.
Firmware Version
Displays the current input resolution / timing and color space information. To return to the
System menu, press the Menu button.
1280x720/60
RGB 4 : 4: 4
FIRMWARE VERSION IS 1.37
To Next Page
Loading...