page | 154
#set_color_balance
Sets the picture color balance. This commands can only be used when setting the
#set_color_temp command to USER. The default value for all color channels is 50.
Syntax
#set_color_balance param1 param2
Parameters
param1 Integer [0 ... 2]
param1 Description
0
Red Channel
1
Green Channel
2
Blue Channel
param2 Integer [0 ... 100]
Examples
#set_color_balance 0 45
PICTURE COLOR BALANCE RED CHANNEL SET TO 45
If Color Temperature is not set to USER, then the following feedback will be produced:
#set_color_balance 0 45
COLOR TEMP IS NOT USER!!!
Related Commands
#set_color_temp
#get_color_balance
Advanced Operation
Commands
Advanced Operation
To Next Page
Loading...