Gefen EXT-MFP - Page 170

page | 160
#set_uo_scan
Sets the amount of underscan or overscan on the output. The default value for both
underscan and overscan is Off.
Syntax
#set_uo_scan param1 param2
Parameters
param1 Character
param1 Description
U
Underscan
O
Overscan
param2 Integer [0 ... 3]
param2 Description
0
Off
1
3%
2
6%
3
9%
Example
#set_uo_scan O 2
OVERSCAN SET TO 6%
Related Commands
#get_uo_scan
Advanced Operation
Commands
Advanced Operation