Gefen EXT-MFP - Page 70

page | 60
3. Press the OK button. The Under/Over Scan option will be highlighted.
4. Press the ▲ or ▼ buttons to highlight the Send HPD Pulse option.
5. Press the OK button, again, to select the Send HPD Pulse option.
6. The word “Send” will appear, in red, next to the Send HPD Pulse option.
7. Press the OK button, again, to activate the Send HPD Pulse option.
8. The screen will ash and after a few moments, the image will be displayed.
9. To return to the previous menu, press the ▲ or ▼ buttons to highlight the Back
option, then press the OK button. You can also press the Menu button to return
to the top-level menu.
Basic Operation
Menu System
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
Auto Size ---
Phase ---
V Position ---
H Position ---
Under/Over Scan Off
Aspect Ratio 16:9
HDCP On
Send HPD Pulse
Back
HDMI Settings
Auto Size ---
Phase ---
V Position ---
H Position ---
Under/Over Scan Off
Aspect Ratio 16:9
HDCP On
Send HPD Pulse Send
Back
HDMI Settings
Basic OperationBasic Operation