page | 6
Getting Started
Getting Started
Introduction
ID Name Description
1 Off Press this button to place the Multi-Format
Processor in Standby mode.
2 Video Press one of these buttons to select the
video input. This will also select a linked
Audio input. “Mask” will turn off the Video
output.
3 Audio Press one of these buttons to change the
audio input. The video source will not
change. “Mute” will turn off the audio.
4 Menu Press this button to display the On-Screen
Menu.
5 Navigation Arrows /
Analog Volume Control
Press these buttons to navigate the
On-Screen Display. The ▲ or ▼ buttons
also control analog audio volume when the
On-Screen Display is inactive.
6 Exit Press this button to “back up” in the
On-Screen Menu, or to close the Menu
entirely.
7 Resolution These buttons cycle through the available
Resolution options.
8 Aspect Ratio These buttons cycle through the available
Aspect Ratio options.
9 Info Press this button to display current system
status on the On-Screen Display.
10 On Press this button to power-on the Multi-
Format Processor.
To Next Page
Loading...