Gefen EXT-MFP - Page 202

page | 192
Advanced Operation
Commands
#set_netmask
Sets the subnet mask. The subnet mask must be entered using dot-decimal notation.
The Multi-Format Processor must be rebooted after executing this command. The default
net mask is 255.255.255.0.
Syntax
#set_netmask param1
Parameters
param1 Subnet mask
Example
#set_netmask 255.255.0.0
NETMASK ADDRESS IS : 255.255.0.0
PLEASE REBOOT THE UNIT TO APPLY CHANGES
Related Commands
#get_netmask
Advanced Operation