page | 204
Advanced Operation
Commands
#set_telnet_welcome
Enables or disables the Telnet Welcome Screen. When enabled, the following message
will be displayed at the beginning of each Telnet session: Welcome to EXT-MFP
TELNET. This message is enabled, by default. The message may be disabled for
communications with some control systems.
Syntax
#set_telnet_welcome param1
Parameters
param1 Telnet Welcome [0 ... 1]
param1 Description
0
Telnet Welcome Disabled
1
Telnet Welcome Enabled
Example
#set_telnet_welcome 0
TELNET WELCOME SCREEN IS DISABLED
Related Commands
#get_telnet_welcome
Advanced Operation
To Next Page
Loading...