page | 210
Advanced Operation
Commands
#set_udp_remote_ip
Sets the remote UDP IP address. The IP address must be specied using dot-decimal
notation. The default UDP remote IP address is 192.168.1.255. The Multi-Format
Processor must be rebooted after executing this command.
Syntax
#set_udp_remote_ip param1
Parameters
param1 IP address
Example
#set_udp_remote_ip 192.168.1.129
UDP REMOTE IP ADDRESS : 192.168.1.129
Related Commands
#get_udp_remote_ip
Advanced Operation
To Next Page
Loading...