page | 223
Advanced Operation
Commands
#set_device_descr
Assigns a name to the Multi-Format Processor. This is useful when there are multiple
devices in a project and you want to give them different names (e.g. Conf Rm 1, Conf
Rm 2, etc.) The value of param1 cannot exceed 12 characters in length. The Device
Description will show on the Gefen Syner-G Discovery page. The default name is
EXT-MFP.
Syntax
#set_device_descr param1
Parameters
param1 String
Example
#set_device_desc Conf Rm 1
DEVICE DESCRIPTION NAME IS SET TO Conf Rm 1
Related Commands
#get_device_descr
To Next Page
Loading...