Gefen EXT-MFP - Page 237

page | 227
Advanced Operation
Commands
#set_display_notify
Sets the on-dcreen timeout (in seconds) of the display characteristics. When the video
source changes, this window can pop up to show the new resolution. The default timeout
value is 5 seconds.
Syntax
#set_display_notify param1
Parameters
param1 Integer [0 ... 2]
param1 Description
0
5 Seconds
1
Off
2
Always On
Example
#set_display_notify 1
DISPLAY NOTIFICATIONS SET TO OFF
Related Commands
#get_display_notify