Gefen EXT-MFP - Page 242

page | 232
Advanced Operation
Commands
#set_ir_channel
Sets the IR channel for the Multi-Format Processor. The default IR channel setting is 1.
The IR channel for the Multi-Format Processor can also be set under the System (page
108) tab within the Web interface.
Syntax
#set_ir_channel param1
Parameters
param1 IR Channel [1 ... 4]
param1 Description
1
Channel 1
2
Channel 2
3
Channel 3
4
Channel 4
Example
#set_ir_channel 3
IR CHANNEL IS SET TO 3
Related Commands
#get_ir_channel
Advanced Operation