Gefen EXT-MFP - Page 32

page | 22
Basic OperationBasic Operation
Menu System
4. Press the OK button, again, to select the Contrast option.
5. The current contrast value will highlighted in red.
6. Press the ▲, ▼, ◄, or ► buttons to select the desired contrast setting.
The range is: 0 - 100.
7. Press the OK button to accept the selected contrast setting.
8. To return to the previous menu, press the ▲ or ▼ buttons to highlight the Back
option, then press the OK button. You can also press the Menu button to return
to the top-level menu.
Contrast 050
Brightness 050
Saturation 050
Hue 050
Range Limited
Color Temp ---
Balance
Sharpness 000
Back
HDMI Settings
Contrast 067
Brightness 050
Saturation 050
Hue 050
Range Limited
Color Temp ---
Balance
Sharpness 000
Back
HDMI Settings
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
Basic OperationBasic Operation