Gefen EXT-MFP - Page 48

page | 38
Basic OperationBasic Operation
Menu System
4. Press the ▲ or ▼ buttons to highlight the Sharpness option.
5. Press the OK button to select the Sharpness option.
6. The current sharpness setting will highlighted in red.
7. Press the ▲, ▼, ◄, or ► buttons to set the sharpness setting. The range is: 0 - 100.
8. Press the OK button to accept the desired sharpness setting.
9. To return to the previous menu, press the ▲ or ▼ buttons to highlight the Back
option, then press the OK button. You can also press the Menu button to return
to the top-level menu.
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
Contrast 067
Brightness 055
Saturation 048
Hue 052
Range Full
Color Temp User
Balance
Sharpness 000
Back
HDMI Settings
Contrast 067
Brightness 055
Saturation 048
Hue 052
Range Full
Color Temp User
Balance
Sharpness 025
Back
HDMI Settings
Basic OperationBasic Operation