Gefen EXT-MFP - Page 67

page | 57
Basic OperationBasic Operation
Menu System
3. Press the OK button. The Under/Over Scan option will be highlighted.
4. Press the ▲ or ▼ buttons to highlight the HDCP option.
5. Press the OK button, again, to activate the HDCP option.
6. The current value will highlighted in red.
7. Press the ▲, ▼, ◄, or ► buttons to switch between On or Off.
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred
Auto Size ---
Phase ---
V Position ---
H Position ---
Under/Over Scan Off
Aspect Ratio 16:9
HDCP On
Send HPD Pulse
Back
HDMI Settings
Auto Size ---
Phase ---
V Position ---
H Position ---
Under/Over Scan Off
Aspect Ratio 16:9
HDCP On
Send HPD Pulse
Back
HDMI Settings
Auto Size ---
Phase ---
V Position ---
H Position ---
Under/Over Scan Off
Aspect Ratio 16:9
HDCP On
Send HPD Pulse
Back
HDMI Settings
®
RMT-MFP
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Video
*Preferred