page | 64
4. Press the ▲ or ▼ buttons to highlight the Analog Mode option.
5. Press the OK button, again, to select the Analog Mode option.
6. Press the ▲, ▼, ◄, or ► buttons to switch between Fixed or Variable.
► Fixed
The Multi-Format Processor will control the audio output level. This is the default
setting.
► Variable
The source device controls the audio output level.
7. Press the OK button to accept the desired setting.
8. To return to the previous menu, press the ▲ or ▼ buttons to highlight the Back
option, then press the OK button. You can also press the Menu button to return
to the top-level menu.
Basic Operation
Menu System
Analog Out On
Analog Mode Fixed
HDMI Link Internal
DP Link Internal
DVI Link Optical
VGA Link L/R 1
Comp Link L/R 2
Back
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Analog Out On
Analog Mode Fixed
HDMI Link Internal
DP Link Internal
DVI Link Optical
VGA Link L/R 1
Comp Link L/R 2
Back
OK
Resolution
Menu
Exit
L/R 1
Int
VGA
HDMI
Off On
DP DVI
Comp Mask
Optical Coaxial
L/R 2 Mute
Info
Vol -
Vol +
Aspect Ratio
Audio
Basic OperationBasic Operation
To Next Page
Loading...