Gefen EXT-UHD600A-44 User Manual

page | 129
Advanced Operation
Commands
#set_audio_output
Sets the analog audio mode for the specifed output(s).
Syntax
#set_audio_output output audtype
Parameters
output
Type: CHAR / INTEGER
The alphabetic identier of the output (A - D). Set this parameter to 0 to set all
outputs to the same audio mode (Feedback lists all analog audio modes for
outputs in order A - D).
audtype
Type: CHAR
The method of how the analog output will be sent to the output. Accepts a value
from the table below.
Type Description
F
Fixed
V
Variable
Example
#set_audio_output a f
AUDIO OUTPUT A F
Related Commands
#get_audio_output

Gefen EXT-UHD600A-44 Specifications

General

Brand	Gefen
Model	EXT-UHD600A-44
Category	Amplifier
Language	English