page | 71
Command Description
#get_gateway
Returns the gateway IP address of the matrix
#get_ip_address
Returns the IP address of the matrix
#get_ip_mode
Returns the IP mode of the matrix
#get_ipcong
Returns the matrix IP conguration
#get_mac_addr
Returns the MAC address of the matrix
#get_netmask
Returns the subnet mask of the matrix
#get_remote_udp_access
Returns the remote UDP access state of the matrix
#get_remote_udp_ip
Returns the remote UDP IP address of the matrix
#get_remote_udp_port
Returns the remote UDP listening port
#get_telnet_access
Returns the Telnet access state
#get_telnet_login
Returns the current status of the Telnet login process
#get_telnet_message
Returns the Telnet login welcome message status
#get_telnet_port
Returns the Telnet listening port
#get_udp_access
Returns the UDP access state
#get_udp_port
Returns the UDP listening port
#get_web_port
Returns the HTTP listening port
#set_gateway
Sets the gateway address
#set_ip_address
Sets the IP address
#set_ip_mode
Sets the IP mode
#set_netmask
Sets the subnet mask for the matrix
#set_remote_udp_access
Enables or disables remote UDP access
#set_remote_udp_ip
Sets the remote UDP IP address
#set_remote_udp_port
Sets the remote UDP listening port on the matrix
#set_telnet_access
Enables or disables Telnet access
#set_telnet_login
Enables or disables the Telnet login process
#set_telnet_message
Enables or disable the Telnet welcome message
#set_telnet_port
Sets the Telnet listening port on the matrix
#set_udp_access
Enables or disables UDP access
#set_udp_port
Sets the UDP listening port on the matrix
#set_web_port
Sets the HTTP listening port
Advanced Operation
Commands
Network Settings