page | 46
Copying EDID Data
The EDID Copy tab allows an EDID to be copied from an input or output (sink device) to
any input. In order to copy an EDID to an input, the input must be set to Custom - User-
dened mode and then unlocked. See Setting the EDID Mode (page 44) for more
information.
1. Click the Manage EDID tab within the built-in web interface.
2. Click the EDID Copy sub-tab.
3. Click the button of the desired output or input from the Select EDID to Copy section.
Select only one input or output at a time.
Basic Operation
The Web Interface
Basic Operation
To Next Page
Loading...
Need help?
General
