Gefen EXT-UHD600A-44 User Manual

page | 14
There may be situations where the IR sensor is blocked by a cabinet or other mounting
device. In this case, the included IR extender (Gefen part no. EXT-RMT-EXTIRN) can
be connected to the IR In/Ext port on the rear panel of the matrix. The sensor on the IR
extender behaves exactly like the sensor on the front panel of the matrix. Always point the
IR remote control unit in the direction of the IR sensor.
The IR In/Ext port can also receive electrical IR signals from an Automation Control
System. Connect a 3.5mm-to-3.5mm mini-stereo cable from the IR In/Ext port to the port
on the control system.
Basic OperationBasic Operation
Using the IR Extender
Basic OperationBasic Operation
Ultra HD 600 MHz 4x4 Matrix w/HDR and Audio De-Embedder
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
1 2 3 4 Off 1 2 3 4 Off 1 2 3 4 Off 1 2 3 4 Off
A B C
D
Reset Power
Out DOut COut BOut AIn 4In 3In 2In 1
LRP
Out A
Out B Out C
Out D
RS-232
IP Control
USB Power
EXT-UHD600A-44
IR In/Ext
L/R L/R L/R
L/R
24V DC
DS US DS US
USB
USB
Output
RMT-44A
Down Up
OFF1
3
Input
4
2
Preset
Mask
Lock
A B
C D
Mute
Volume
R03,1.5V
R03,1.5V
ON
1 2
IR extender
from Automation
Control System
OR
IR remote
IR sensor
Ultra HD 600 MHz 4x4 Matrix w/HDR and Audio De-Embedder
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
1 2 3 4 Off 1 2 3 4 Off 1 2 3 4 Off 1 2 3 4 Off
A B C
D
Reset Power
Out DOut COut B
Out AIn 4In 3In 2In 1
LRP
Out A
Out B Out C
Out D
RS-232
IP Control
USB Power
EXT-UHD600A-44
IR In/Ext
L/R
L/R L/R
L/R
24V DC
DS US
DS US
USB
USB

Gefen EXT-UHD600A-44 Specifications

General

Brand	Gefen
Model	EXT-UHD600A-44
Category	Amplifier
Language	English